当前位置:首 页 > 产品介绍 > 产品简介

产品简介

我们拥有最专业的技术,快速的安装,永久安全可靠的解决方案,相信总有一款产品是适合您的!

We have the most professional technology, rapid installation and permanent safe and reliable solution , I believe there is always a product is suitable for you.

安装与系统测试

Installation And System Testing


接头与管道在使用前应保持清洁和完好无损

Fittings and pipe should be kept clean and non-destructive before use.

所有管道和接头在安装后都必须经过压力测试,以确保系统完整性,然后才能交付给最 终用于。

All pipes and fittings after installation must be pressure tested to ensure system integrity, and then they can be delivered to the final customer.

化学品

Chemicals

有关在化学品或其他潜在的腐蚀性液体中的使用注意事项,请咨询我们的客户服务部门。不建议将接头用于爆炸性气体、汽油和其他燃料或供暖系统。

Precautions on the use of chemicals or other potentially corrosive liquids , please contact our customer service department . The fitting is not recommended for use in explosive gas , gasoline and other fuels or heating systems

质保

Warranty

虽然我们对生产缺陷或材料提供质保,但是客户需要负责确保接头和相关产品适合相应的应用。必须根据我们的建议进行正确安装。符合公认的实践守则和相关国家标准并得到正确的维护。

Although we provide warranty for manufacturing defects or material, the customers need to ensure that fittings and related products are suitable for corresponding application . Must be properly installed according to our recommendations. Compliance with recognized codes of practice and relevant national standards and has been properly maintained .

技术指标

Technical indicators

工作介质
(Working medium)

温度范围
 (Temperature range)

工作压力
 (Working Pressure)


(water)

20°C

10 Bar

65°C

7 Bar

也适用于真空,根据所有管道的不同,在某些情况下接头可用更高的压力和温度。请咨询我们的客服部门获得帮助。 注意:1Bar=0.1mpa

Also applies to a vacuum , depending on the pipes, the joints can be used at higher pressure and temperature under certain circumstances Please contact our customer service department for assistance. Note: 1 bar = 0.1 mpa

管材插入管件长度与外径相应对称表

The length of the pipe inserted to fittings and the outer diameter corresponding symmetric table

公称外径
(Nominal diameter)

插入管件长度L1/mm
The Length Of Inserted Pipe (L1 / mm)

标准管材外径dn/mm
Standard pipe diameter (dn/mm)

20

35

20.1±0.1

25

37

25.1±0.1

32

40

32.1±0.1

40

55

40.2±0.1

50

72

50.2±0.1

63

100

63.2±0.1

工作压力
(Working Pressure)Temperature range